Today I worked on editing the video to make sure it was the closest to the final version. I went through the performance cut and the non lip sync. At this point the performance cut was the best cut I had done. I didn’t want to keep re editing the performance cut as constantly editing it would ruin the video as I'd just keep moving them around. Working on the non lip sync part was the hardest part and took the longest. This was because the effect I was trying to create wasn’t on Premiere pro so I had to find a way to make the effect work.
I found a technique that allowed me to create the distorted camera look the group wanted. To create this effect I created three layers of the same clips for all the clips that needed the effect. After creating the duplicate layers I added the RGB effect on the first clip and made sure it was 100% Red then did the same for the next layer but made it green and the next blue. On all the three layers the effect was colour burn light so that you could see the layer below. I also changed the positioning of the clips so you could see the glitch effect and the fourth layer didn’t have any effect on it so that the brightness could be seen in the clips.
Before the effect
After the effect
I also added a recording png to show that it was actually the camera recording and I added time stamps at the bottom to show it was running. I added the bar on the recording part as well to ensure that there is a clear difference between the performance and the camera parts.
Working on adding the bars and time code
After going through all of this I need to work on colour grading the performance cut.
No comments:
Post a Comment